CALL OR EMAIL US TODAY FOR YOUR FREE ESTIMATE – 202-276-5004   FAMILY.ROOFING@YAHOO.COM

 

A TRUSTED NAME IN WASHINGTON, DC FOR THREE GENERATIONS!  EXPERTS IN SLATE * METAL * RUBBER * SHINGLE * GUTTER & DOWNSPOUTS

 

 

Types of Roof Vents for Houses

Proper ventilation is essential to any home.  However, conflicting opinions on which of the many types of roof vent is most efficient may be quite confusing.  Depending upon your local climate, building codes, and the size of your home, one type of vent system may be more efficient than another.  There are two major types of vent systems, intake and exhaust, and you should consider adding one of each for maximum efficiency.

Types of Exhaust Vent Systems

The primary purpose of an exhaust vent is to pull excess heat and humidity from your home.  However, it is a common myth that these vents also remove heat in winter months. Properly installed roof vents will increase the lifespan of your roof by reducing the risk of warping or other water-related issues.  Exhaust vents should always be paired with an intake vent system for maximum efficiency.

Cupola Vents

More often a decorative feature, cupolas may be converted into functional static vents.  They are located atop ridges which allow them to draw heat and moisture efficiently where they are located.  Unfortunately, this type of vent is a poor choice on its own due to its limited coverage and is therefore best used to compliment other exhaust systems.

Louver Vents

Also known as box, turtle, and low-profile vents, this system consists of static louvers which must be spaced evenly and as close to the ridge as possible for maximum efficiency.  Some models are square while others are rounded, allowing for some limited aesthetic choice.  They sit lower than roof turbines, making them less visible, although they are still easy to spot.  You will find these to be an excellent DIY project as they are easy to install, especially if your home has an existing static vent system.

Some additional steps and care are needed to make these systems waterproof.  In addition, they are less efficient than ridge vents and their visibility may make them an unattractive choice for your home.  Finally, while inexpensive, the cost of installation may increase depending upon how many you need and how good your intake system is.

Powered Vents

Generally consisting of electric fans built into the gables of your attic, powered vents are a mix of good and bad.  For example, they require 300 watts of electricity to run, which has an environmental impact.  At the same time, they are usually paired with a thermostat so they only run when the attic temperature exceeds 100 degrees.  Newer solar models allow powered vents to run off the grid, but are more expensive.

A powered vent is often noisy, with the sound buffered only by your home’s building materials and insulation.  You may hear them running late into the evening in warmer climates when you are trying to sleep.  Installation is more difficult and may require electrical knowledge if adequate power supplies aren’t readily available.  The added weight also makes them more difficult to install.  Finally, there are many moving parts which make this type of ventilation more prone to breakdowns.  Frequent inspections are therefore necessary to ensure the fan is functioning properly.

Ridge Vents

Ridge Vents are installed on the peak or ridge of your roof and covered by shingles.  They contain no moving parts but must be properly paired with intake vents, such as soffit vents, in order to function.  Unlike other types of vents, the ridge vent doesn’t create hot or cold areas in your roof, preventing some parts from aging faster than others.

You should not attempt to install a ridge vent as a DIY project, as they are extremely difficult to install and the vent itself is expensive.  Some contractors will attempt to run the vent only partway along the roof, which lowers or even negates its functionality.   Another common problem is that the exhaust hole must be equal in size to the intake holes for the vent to function properly.   As a result of these difficulties, ridge vents may not be right for your home, even though they are overall the most efficient option.

Roof Turbines

Made of lightweight aluminum, roof turbines resemble mushrooms with fan blades protruding from their sides.  These blades may either be housed in a protective casing or have small louvers designed to open only when there is wind.  They are highly effective and require no power.  Stale, moist air slowly escapes from the turbine and a gentle breeze causes the turbine to pull large volumes of air up.